LED" title="LED">LED" title="LED">LED驅動器應用,可調整關斷時間,源250mA/沉500mA峰值驅動能力, 25°C時的電流檢測精度±3.2%,3.3V電平調光輸入,具有熱
壓膜電感器制造商關斷,過流保護和最大開態(tài)時間保護,主要用于LCD屏的LED背光驅動器,LED條燈,LED街燈和LED燈泡.本文介紹了NCL30051主要特性,方框圖, 典型應用電路圖, 輸入80V 350mA輸出的降壓LED驅動器評估板NCL30105GEVB電路圖,材料清單和PCB布局圖.
The NCL30105 is a peak current controlled fixed off time buck controller designed for LED driver applications. It
繞線電感is optimized to operate in deep continuous conduction mode eliminating the need for output electrolytic capacitors. Featuring an adjustable off time generator, the controller can drive a MOSFET up to a switching frequency of 500 kHz. A dedicated dimming pin enables the use of a pulsewidth modulat電感器圖ed logic signal to dim the LED directly. The soft-start pin creates a startup sequence that slowly ramps up the peak current and enables the adjustment of the peak current set point for analog dimming control. The device features robust protection features to detect switch overcurrent faults and to detect maximum on time events.
NCL30051主要特性:
• Constant Off Time Current−Mode Control Operation
• Adjustable Off Time (0.5 [1]s to 10 [1]s)
• Internal Leading Edge Blanking
• Source 250 mA / Sink 500 mA Peak Drive Capability
• ±3.2% Current Sense Accuracy at 25℃• Internal Startup Delay
• 3.3 V Logic Level Dimming Input
• This is a Pb−Free Device
NCL30051安全特性:
• Thermal Shutdown
• Maximum On Time Protection
• Overcurrent Protection
NCL30051典型應用:
• LED Backlight Drivers for LCD Panels
• LED Light Bars
• LED Street Lighting
• LED Bulbs
圖1.NCL30051方框圖
圖2.NCL30051典型應用框圖
圖3.NCL30051典型應用電路圖
圖4. 評估板NCL30105GEVB外形圖:輸入高達80V,輸出350mA
圖5. 評估板NCL30105GEVB電路圖(1)
圖6. 評估板NCL30105GEVB電路圖(2)
評估板NCL30105GEVB材料清單:
圖7. 評估板NCL30105GEVB元件布局圖:頂層
圖8. 評估板NCL30105GEVB元件布局圖:底層
詳情請見:
http://www.onsemi.cn/pub_link/Collateral/NCL30105-D.PDF
和
http://www.onsemi.cn/pub_link/Collateral/NCL30105GEVB_SCHEMATIC.PDF
大功率電感廠家 |
大電流電感工廠
數字中頻式頻譜儀的分辨率帶寬設計 頻譜分析儀按實現方式可分為模擬式和數字式兩種，前者以模擬濾波器為基礎，后者則以數字濾波器和FFT分析為基礎。相比之下，模擬式頻譜分析儀不能獲得實時頻譜，且由于模擬濾波器會受到非線性、溫漂、老化等影響
功率電感用于單片機的數控開關電源設計(下） 3.1 EMI濾波電路 EMI濾波器如圖3所示電路。該濾波器有兩個輸入端、兩個輸出端和一個接地端。電路包括快速保險絲F1，泄放電阻R1，共模電感L1、L2，濾波電容C1、C2、C8、C9。泄放電阻R
基礎課堂 薄膜晶體管原理知識簡析 首頁 >電子元器件基礎課堂 薄膜晶體管原理知識簡析2015-11-13 09:34來源：電源網綜合作者：柚子晶體管原理知識對于剛剛開始接觸電子電路設計的新人工程師來說，是非常重要的。薄膜晶體管作為一
